Bad Pool Header Error In Windows 10 [Fixed]
DriversHow To

Bad Pool Header Error In Windows 10 [Fixed]

System errors are not always bad for your PC. They sometimes work as a protective measure of the Windows operating system for various harmful threats. Bad Pool Caller and Bad Pool Header in Windows 10 are such errors.

BSOD Bad Pool Header and Bad Pool Caller error causes a system crash without any prior notification to prevent your system from various threats and damages. However, it can be annoying to have a system failure while doing some important work. But don’t worry, you can fix these kinds of errors with some simple solutions. Along with these issues, you can also eliminate the reasons that are responsible for them and safeguard your PC from various unknown damages.

Methods to Fix Errors Like Bad Pool Header in Windows 10

Here we have mentioned some of the helpful fixes to stop Code Bad Pool Caller and Bad Pool Header in Windows 10.

Fix Device Drivers

Faulty device drivers are one of the most harmful things for your PC. They are also the prominent reason for the BSOD Bad Pool Header error. However, one good thing about the faulty drivers is that you can fix them quite easily if you select the right method to do so.

There are multiple methods through which you can update and repair your problematic drivers. But not all of them are effective and time-saving at the same time. Hence, either you have to compromise with the quality of driver repair or you have to invest your time and efforts. You might have started worrying as you do not want to negotiate with any of these two things. Don’t panic. There is a solution that can fulfill both these requirements along with many others as well. It is Bit Driver Updater.

With this utility, you can repair your device drivers quite fast and handily. You do not even have to think about the legitimacy of the drivers, Bit Driver Updater fixes your device drivers only with the WHQL certified driver updates. So, it has got everything you need. If you want to try this software, then you can obtain it from here.

download now button

After successfully obtaining and setting up the software on your PC, here are the directions that can help you to repair your drivers using Bit Driver Updater.

1. Run the driver updating software.

2. Start detecting the drivers that require an update by choosing the Scan option.

3. Repair all the drivers by selecting the ‘Update All’ option.

Bit Driver Updater


After completing the repairs, check if the Bad Pool Header in Windows 10 got resolved or not by rebooting the system.

Troubleshoot BSOD

Windows 10 comes with an inbuilt troubleshooting feature for BSOD errors. Hence, if the Bad Pool Header and Bad Pool Caller in Windows 10 is still bothering you even after repairing the device drivers, then you can try using the troubleshooter. Here are the steps to troubleshoot BSOD errors on Windows 10 PCs.

Step 1: First of all, go to the Windows settings by doing a right-click on the Windows button available on the taskbar.

right click on start menu and choose setting

Step 2: In settings, click Update & Security.

update & security from windows setting

Step 3: Choose Troubleshoot from the options available on the left side of the Settings Window.

Step 4: Click on BSOD and then Run the troubleshooter.

Blue screen troubleshoot

Step 5: Proceed as per the instructions provided by the troubleshooter.

Upgrade to The Latest Version of Windows

You can also try updating the Windows operating system to its latest version. This method can fix several issues of your PC. Hence, we advise you to try it. Here are the proper instructions to upgrade Windows to its latest version.

Step 1: Same as the above method, open Windows Settings.

right click on start menu and choose setting

Step 2: Then go to the Update & Security and select it.

update & security from windows setting

Step 3: After that, choose ‘Check for updates’ under Windows Update.

Update The Windows

Then after successfully upgrading your operating system to its latest version, reboot your PC. If the issue of Bad Pool Header in Windows 10 still exists, then try some other solution mentioned on this guide.

Stop Fast Startup Feature

Disabling or stopping the Fast Startup feature is a fix that many people claim have worked for them. Hence, here are the instructions through which you can disable the Fast Startup and stop Code Bad Pool Header error.

Step 1: Use the Windows Search Box to run Control Panel.

type Control Panel

Step 2: Look for Power Options among various options and select it.

Power Options from control panel

Step 3: Choose ‘What the power buttons do/does’.

Change plan settings of power options

Step 4: Make a click on ‘Change settings that are currently unavailable’.

Change settings that are currently unavailable

Step 5: Now, deselect Turn on fast startup (recommended).

Step 6: At last, choose Save Changes.

Fix RAM issues

The BSOD Bad Pool Header in Windows 10 can also be a result of problematic RAM. You have to make sure your RAM is fine in both physical and digital manner. Hence, first of all, take out the RAM from your system and clean the dust that has covered it. After that, put it back to its place and check if the issue has got resolved or not. If it still exists, then try diagnosing the RAM digitally by following the below instructions.

1. Open the Run utility by pressing the Windows Key and R altogether on the keyboard.

2. Enter mdsched.exe and then select OK.

type mdsched.exe in RUN command

3. Select Restart now and check for problems (recommended).

4. After rebooting the PC, right-click on the Windows icon on the taskbar.

5. Click on the Event Viewer.

right click on start menu and select event viewer

6. Expand Windows Logs.

Expand Windows Logs

7. Select System.

system error logs

8. Now, go for the Find option available under the Actions.

find option in system error log

9. In Find what, enter ‘MemoryDiagnostic’ and then click Find Next.

After this, it will provide you with the complete memory diagnostics. If you find any issue, then contact the service center of your PC manufacturer or your local PC repair shop for further guidance regarding Bad Pool Header error.

Temporarily Stop the Third-Party Anti-malware Applications

It is the function of an Anti-malware program to check the overall functioning and applications of PC. Hence, it has to intervene in the functionality of various other programs. This can sometimes also cause Bad Pool Header error in Windows 10.

Hence, we suggest you to try disabling the Anti-malware program temporarily to check if that is the reason for the issue. If it fixes the issue, then you have to contact the manufacturer of the program. Or, if you do not get a proper response from them, then we advise you to change your antivirus program.


Remove External Devices

If you have checked the RAM and other things, and still facing the Bad Pool Caller, Bad Pool Header, or any other BSOD error, then it may be because of some external device. Sometimes, the external devices that we connect to our PCs can cause such BSOD issues. Hence, we suggest you detach them all for once. Kindly note that you have to keep your mouse and keyboard connected with your PC as, without them, you cannot perform any function.

After disconnecting the devices, reboot your PC. If it fixed the issue, then reconnect all the devices again, but one by one. Observe which device is causing the error and then try to fix the software of that device or contact the manufacturers.

Use Windows Restore Point

If you have recently updated your operating system and since then you are observing these BSOD errors, then we would like to advise you to use the Windows Restore Point. You can use the Restore Point to switch back to the previous version of the Windows operating system. Here are the steps that can lead you to properly restore the earlier version of the Windows.

1. Use Windows Key and the R key to open Run utility.

2. Enter ‘rstrui’ and after that select OK.


3. Choose Next.

4. After that, check the show more restore point and opt for the next option.

system restore points
Image Source: Tenforums

5. Choose the particular restore point that you want to switch with your present version of the operating system.

6. Go for Next and after that, choose Finish.

After finishing the restoration of Windows, you have to reboot your operating system to confirm if the BSOD issue got resolved or not.

Bad Pool Header in Windows 10- Fixed

So, here the guide for resolving BSOD errors such as Bad Pool Header in Windows 10 ends. We hope that you have found the information provided here helpful for you. All the solutions that we have provided above are tested and safe for your PC. You can use any of them depending on your situation to resolve the error.

Along with this, we would like to end this write-up with providing a suggestion to keep your device drivers updated. You must repair them timely to avoid any such errors. It doesn’t require any technical knowledge or heavy efforts to take care of your device drivers. You can easily to it with the help of an impeccable driver updating software like Bit Driver Updater.

Moreover, if you have any suggestions about the write-up and the information that we provide, then feel free to share them with us.

Rishi is a Software Engineer and a technical content specialist who has a taste in writing over cybersecurity and widespread threats. He ensures utilizing his academic knowledge into developing remedial content for users who are seeking help. A staunch admirer of Jazz, Rishi is also a gourmet.

Leave a Response