How ToWindows

How To Use Device Manager On Windows?

How to use Device Manager on Windows
How to use Device Manager on Windows
9.01Kviews
facebooktwitterpinterestlinkedin tumblremail

Using the PC in our day to day life has become a necessity. However, our computers sometimes seem to malfunction in the form of crash downs upon prolonged use. This may seem extremely annoying, especially when in the middle of something urgent. Usually, system crashes and hangs are indicative of hardware driver issues, and the best way to manage all the Windows drivers is by using the Device Manager, which is a built-in Windows driver troubleshooting tool of your Windows computer. You can also fix audio and graphics card issues using Device Manager.

The below article will enlighten you on how to access and use the device manager.

What is Device Manager?

Device Manager, as the name suggests, is the most important tool to scan for hardware changes of your computer. This plays an important role in managing a device’s drivers. The Device Manager comes in use only when you have to troubleshoot the hardware devices and drivers of your PC. The Device Manager is available on almost all versions of Windows, including some of the oldest versions too.

How to access Device Manager?

The simplest way to access Device Manager on any version of Windows computer is through the Run command prompt box. The below steps will guide you regarding the same:

  • Hold the Windows key+R key together and press them.
  • Input “devmgmt.msc” in the input box, and then press Enter.
Run command
  • On Windows 7, you can also use the following path to access the Device Manager:
    Go to Control Panel>Hardware and Sound>Hardware and Printers>Device Manager.
  • On Windows 8 and 10, right-click on the Start menu and choose Device Manager.
Device Manager

Viewing the Installed Hardware

All kinds of system information can usually be found in the Device Manager, starting from the model number of the video card, hard drive and, even the DVD drive.

  • All the hardware installed in your computer can be viewed in the Device Manager categorically.
Viewing the Installed Hardware
  • To view the hidden hardware, you can click the View tab and choose the “Show hidden devices” option. You can see all the low-level system drivers, drivers from third-party software installations, and many “non-plug and play drivers.”
Viewing the Installed Hardware
  • Locating Ghosted devices – This can be done in case of USB devices not connected to your computer but also doesn’t appear on the list. This is only possible on the Windows version that was released before Windows 8 version. You can run a command in the Command Prompt window as follows:
set devmgr_show_nonpresent_devices=1”
start devmgmt.msc

The Device Manager will then display all hidden devices which can be removed.

Find all the hardware devices not functioning properly

The hardware devices which are not properly functioning due to driver problems can be spotted with the help of a yellow triangle with an exclamation mark embossed upon the device icon.

Find all the hardware devices not functioning properly
  • Once you click the right to go to the Properties dialog, you can see more information about the fault in the device status box.
  • If there is a driver issue, then check the driver details and also replace the faulty or outdated driver with an updated version of the driver by installing it from the Driver tab of the Properties dialog.
Find all the hardware devices not functioning properly
  • Additionally, you can also use Driver Updater tools to update your system’s drivers.
  • Using Device Manager Scan for hardware changes: After scanning for hardware changes, an unresponsive USB device connected to a USB port might be recognized, so that the device may be used.
    -> In the Device Manager, click on the Computer and then click on Action.
    -> Further, click on Scan to detect hardware changes.
    -> Investigate to see if the USB device is functioning or not.

How to disable a device using Device Manager?

If you don’t want to use a certain hardware device or wish to remove some redundant hardware device, then you can do so by using the Device Manager. When a device is disabled, then it is only applicable to the level of Windows only.

  • For most hardware devices, you can click right on the device name and select the “Disable device” option to stop the functioning of the device.
How to disable a device using Device Manager?
  • If you want to disable hardware, which is listed under the “Non-Plug and Play Drivers” section, then expand the view of that section first. 
  • Right-click on the selected driver that you wish to disable.
  • Choose the Properties option.
  • Under the Driver tab, in the Startup section, choose the “Disabled” option from the dropdown of the Startup Type. Select “OK” to set it accordingly.
How to disable a device using Device Manager?

Manage Windows Device Drivers

All the information and settings pertaining to a specific hardware device can be found in the properties window of that device. You can follow the below path to get to the settings of the device:

Right-click on the device name>Properties>Driver tab. 

The entire information about the driver can be found here, along with the control buttons.

  • Driver details – You can see the exact location of the driver files in the system.
  • Update Driver – You can manually choose an updated version of an obsolete or corrupted driver by searching for it online from the driver’s tab.
  • Roll Back Driver – If you want to downgrade the driver version, in case you encounter issues after upgrading it, then you can easily do so with the help of the Roll Back Driver radio button. However, if this button appears to be grayed out, then the driver hasn’t been updated correctly, or there is no roll-back version available.
  • Disable – You can do this to stop a device from functioning with the help of the Disable button and re-enable it if and when needed.
  • Uninstall – You can uninstall a driver only using the Uninstall button only if you want to purge some of the drivers and reset the device from the initial point again. However, the uninstallation may not happen completely as it may fail to remove all the drivers. Hence, it is better to use the Control Panel to uninstall a device if it needs to be completely removed.
How to disable a device using Device Manager?

Hopefully, you have gained a fair idea over what is device manager. The too not only shows all the installed hardware devices functioning on your system but also helps to check the hardware driver’s details. Further, the defective drivers can also be updated, or the redundant drivers may be disabled with the help of the Device Manager. If you’re aware completely on how to use Device Manager, it becomes handy to operate a Windows machine. Also, the Device Manager can warn you about resource conflicts. But resource conflicts rarely happen these days.

Leave a Response

Rishi
Rishi is a Software Engineer and a technical content specialist who has a taste in writing over cybersecurity and widespread threats. He ensures utilizing his academic knowledge into developing remedial content for users who are seeking help. A staunch admirer of Jazz, Rishi is also a gourmet.